|
|
 |
 |
 |
Repair Services for Industrial and Commercial Customers |
|
|
|
Spectra-PhysicsSpectra-Physics Spectra-physics 130 I bought this instrument new around 2000. I stopped using it about 10 years ago because the range was too low. If I remember correctly I was told that this was because a diode or something was weak. Other than that, the laser should be in good condition. Can it be reworked or does it make economic sense? | Return Home to Spectra-Physics
|
If you have any technical questions or
wish to offer technical information about any Spectra-Physics units then
fill out the form below.
No Soliciting...
-
Spectra-Physics - I have a Spectra Physics 820 CO2 laser. On the controller, I am not able to transfer the Manual Mode to External Mode. The la
-
Spectra-Physics - I bought this instrument new around 2000. I stopped using it about 10 years ago because the range was too low. If I remem
-
Spectra-Physics - I have broken the glass connecting the base to the top of the level and I want to replace the glass regards gary
-
Spectra-Physics - the fan is not working efficiently
getting to hot
what is the repair costs
-
Spectra-Physics - have a 6115d john deere with tow behind scraper lazer works but having trouble with hyd at high rpm it over rides valve. It h
-
Spectra-Physics - I have a Spectra-Physics Laserplane 650 andit fell over and one of the mirrors dislocated and I need it put back in place and
-
Spectra-Physics - same post as above! The glass part broke! looks like it can just be replaced. Can you give me thoughts?
-
Spectra-Physics - What do I need to do to get my Spectra-Physics repaired. It is a model 130.
-
Spectra-Physics - I am looking for the leveling motors I have one bad one can you help
-
Spectra-Physics - I left my plug @ a job site about 6 years ago, so am finely trying to get the stock one for my EL-1. This unit was the best b
-
Spectra-Physics - Looking at purchasing a Spectra Physics 820, Need to know the availability of parts repair and service.
-
Spectra-Physics - hi im after the bottom plane on the laser plane 130 as i have stripped te thread on it i was wondering if you could help
-
Spectra-Physics - i have a 1994 spectra level model 130# and pocket level 3075 I am looking for the manual for both
-
Spectra-Physics - the top af the lazer is a little lose, seems to be the plastic piece, didnt know if it would mess up the accuracy or not. i
-
Spectra-Physics - I need a belt that turns the laser beam for:
Spectra-Physics Laserplane
AccuGuard
Model 1462
Can you supply this or d
-
Spectra-Physics - I am trying to find the glass cylinder that holds the body of this level to the head part as it has just snapped into two bit
-
Spectra-Physics - i need the leveling bubble that mounts on the side it takes 2 if you do not have do you know where i could find them.THANK YO
-
Spectra-Physics - My company working with all of semicondoctor and electoronics company since 2002.
Then, my customer is looking for good re
-
Spectra-Physics - Dear Sir,
I would like to contact you first time.
I am looking for laser parts repair comapny from Japan now.
if you
-
Spectra-Physics - Need a power monitor for a spectra physics 820
-
Spectra-Physics - hello i require main pcb for prinz albert control box cb2mtd
-
Spectra-Physics - I have a 10 year old SP stabilite 2015. Two of the lines are basically shot, the 454 and the 647. Can this be repaired? Or
-
Spectra-Physics - Hello, I\'m looking for spare parts for Spectra Physics Laser model 945L.
I need 5 power supply and 2 mainboards.
Can you h
-
Spectra-Physics - I use to work for Amada for 7 years. Last January I started my own laser repair, install, training business. I\'ve never wor
-
Spectra-Physics - WE HAVE A SPECTRA 820 IN NEED OF REPAIR IT IS ON AN AMADA CUTTING MACHINE IS THAT SOMETHING YOU DO?
THANKS DAVE
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
|
|
|
 |
|
 |
|
|
